化学药品原料药制造业自行监测技术指南设计研究

通过分析化学药品原料药制造业的基本情况、产品种类和生产工艺,以及自行监测技术指南编制的目的和基本要求,梳理出确定监测点位和对应多项污染物排放标准为目前该行业自行监测技术指南编制工作的难点。根据以上分析,提出将指南按工艺类型拆分、监测点位和废气监测指标的确定、监测频次的优化、生产记录内容的设定列为指南编制工作的重点。     

Monitoring,imperfect detection,and risk optimization of a Tasmanian devil insurance population

Most species are imperfectly detected during biological surveys, which creates uncertainty around their abundance or presence at a given location. Decision makers managing threatened or pest species are regularly faced with this uncertainty. Wildlife diseases can drive species to extinction; thus, managing species with disease is an important part of conservation. Devil facial tumor disease (DFTD) is one such disease that led to the listing of the Tasmanian devil (Sarcophilus harrisii) as endangered. Managers aim to maintain devils in the wild by establishing disease‐free insurance populations at isolated sites. Often a resident DFTD‐affected population must first be removed. In a successful collaboration between decision scientists and wildlife managers, we used an accessible population model to inform monitoring decisions and facilitate the establishment of an insurance population of devils on Forestier Peninsula. We used a Bayesian catch‐effort model to estimate population size of a diseased population from removal and camera trap data. We also analyzed the costs and benefits of declaring the area disease‐free prior to reintroduction and establishment of a healthy insurance population. After the monitoring session in May–June 2015, the probability that all devils had been successfully removed was close to 1, even when we accounted for a possible introduction of a devil to the site. Given this high probability and the baseline cost of declaring population absence prematurely, we found it was not cost‐effective to carry out any additional monitoring before introducing the insurance population. Considering these results within the broader context of Tasmanian devil management, managers ultimately decided to implement an additional monitoring session before the introduction. This was a conservative decision that accounted for uncertainty in model estimates and for the broader nonmonetary costs of mistakenly declaring the area disease‐free.     

CMT监测井在黑河流域地下水监测中的应用

以CMT监测井在黑河流域的应用为基础,通过对监测数据和采集的水样进行分析,了解了黑河流域地下水水位动态变化,掌握了黑河流域地下水水化学垂向分布规律,为合理利用黑河流域水资源提供了科学依据。     

日本水环境质量监测管理概述

伴随着日本经济的高速发展,其水环境污染问题十分严峻,防治水污染成为日本政府在20—21世纪的重要工作之一。经过几十年的努力,日本水污染治理取得长足进展。目前日本水环境监测已经形成由水和土壤等方面组成的水循环监测体系,包括地表水、近海、湖泊、地下水和土壤等。在日本的重要环保法律法规中均有涉及水环境监测工作内容的明确法律条文,国家行政机关、地方政府和公立的科研单位在具体实施水环境质量监测过程中的职责和义务不同,水环境质量监测管理的国家行政机关以环境省为主,地方政府根据环境省制定的水环境质量标准、监测技术方法及规范,制定所辖地域的监测方案并实施监测,公立的环境科研机构在环境质量监测工作中起到重要的支撑作用。笔者概述了日本开展水环境质量监测的法律依据和监测管理情况等。     

环境监测事业单位科研管理组织与构建

以江苏省环境监测中心科研管理为例,分析了江苏省现有条件下的环境监测事业单位科研性质和科研管理的主要模式、存在的弊端及今后发展,尝试通过对环境监测网络建设实施方案和地区规划的解读,寻找环境监测科研的研究方向和管理模式,紧密结合江苏省环境监测系统科研管理特点,提出科研管理方案设想和可实现的具体步骤。     

顶空-气相色谱法(氮磷检测器)测定固定污染源废气中三甲胺

建立了顶空-气相色谱法测定固定污染源废气中三甲胺的分析方法。弱酸性吸收液采集固定污染源废气中的三甲胺,碱液中和后顶空进样气相色谱仪氮磷检测器分析。并对平衡温度、平衡时间、盐析效应、氨水和氢氧化钠条件实验进行优化,在最佳实验条件下,三甲胺的方法检出限为0. 46μg/m~3(以采集20 L空气样品计),加标回收率为97%～107%,相对标准偏差在9. 26%以下。利用该方法对垃圾焚烧发电厂厂界空气及鱼粉厂有组织废气中三甲胺进行检测分析,该方法能够满足国家标准及上海地方标准中三甲胺排放限值的要求。     

Temporal and Spatial Trends in Nutrient and Sediment Loading to Lake Tahoe,California‐Nevada,USA

Since 1980, the Lake Tahoe Interagency Monitoring Program (LTIMP) has provided stream‐discharge and water quality data—nitrogen (N), phosphorus (P), and suspended sediment—at more than 20 stations in Lake Tahoe Basin streams. To characterize the temporal and spatial patterns in nutrient and sediment loading to the lake, and improve the usefulness of the program and the existing database, we have (1) identified and corrected for sources of bias in the water quality database; (2) generated synthetic datasets for sediments and nutrients, and resampled to compare the accuracy and precision of different load calculation models; (3) using the best models, recalculated total annual loads over the period of record; (4) regressed total loads against total annual and annual maximum daily discharge, and tested for time trends in the residuals; (5) compared loads for different forms of N and P; and (6) tested constituent loads against land use‐land cover (LULC) variables using multiple regression. The results show (1) N and P loads are dominated by organic N and particulate P; (2) there are significant long‐term downward trends in some constituent loads of some streams; and (3) anthropogenic impervious surface is the most important LULC variable influencing water quality in basin streams. Many of our recommendations for changes in water quality monitoring and load calculation methods have been adopted by the LTIMP.     

我国典型村庄农村环境质量监测与评价

选取典型村庄,基于农村环境质量监测和评价方法,对典型村庄2014年农村环境质量进行监测和评价,结果表明:典型村庄环境空气质量状况总体良好,达标比例为82.0%,超标村庄多分布在中国西北地区;农村饮用水源地水质较差,总体水质达标比例为67.1%,地表水和地下水饮用水源地水质达标比例分别为89.8%和52.6%;农村地表水环境质量欠佳,Ⅰ~Ⅲ类水质断面占72.7%,饮用水水源地和地表水水质各地区均存在超标村庄;部分地区土壤重金属超标问题较为突出,出现监测项目超标情况村庄占20.6%,土壤超标村庄主要集中在中国东北、华中和华南等地区;农村生态质量状况相对较好,"较差"和"差"的县域主要分布在中国西北和华中北部地区。     

基于地面监测数据的2013~2015年长三角地区PM2.5时空特征

近年来,长三角地区灰霾天气持续增多,空气细颗粒物污染问题日益突出。基于2013年1月至2015年5月长三角地区及周边缓冲区内共214个空气质量监测站点PM_2.5逐时监测数据,运用普通克里金插值方法,从年、季、月尺度上分析了PM_2.5的空间分布格局和时间动态变化。结果表明:(1)2 a来,长三角地区PM_2.5浓度空间分布明显呈现整体北部高南部低,局部地区略有突出的分布特征;长三角地区PM_2.5浓度年均值为57.08μg/m³;其中,江苏省PM_2.5的年均值为三省市最高,为65.84μg/m³;其次为上海市,年均值为53.87μg/m³;浙江省PM_2.5的年均值较小,为51.53μg/m³。(2)从季节尺度分析,长三角地区PM_2.5浓度变化表现出冬春季高,夏秋季低的变化趋势;这与区域内冬季风向来源、降水稀少、气象扩散条件差有着密切的关系; (3)长三角地区月浓度变化大致呈U形分布; 12月份PM_2.5浓度最高; 3月份以后, PM_2.5浓度开始呈逐步下降趋势;在5~9月份,区域PM_2.5处于"U"字的谷底,其中6月份夏收时期秸秆焚烧、气象等因素导致PM_2.5浓度有略微升高;进入10月份后迅速攀升,且11、12月份呈现持续升高态势。     

大气颗粒物手工比对监测体系滤膜称量质控技术探讨

健全大气颗粒物手工比对监测体系是"十三五"环境空气自动监测质量管理的一项重点任务,其中颗粒物滤膜的称量直接影响手工监测数据质量。研究调研了国内各级环保部门所属环境监测机构颗粒物滤膜称量工作情况,结合国内外方法标准、技术规范等,重点探讨了称量实验室环境、称量设备、称量影响因素等滤膜称量质控要点,并针对环境管理与监测需求对大气颗粒物手工比对监测滤膜称量质控提出建议。